Sharon PARTICLE BOARD
SharonPly offers India plenty of options in particle boards, through its modern manufacturing facility at Gummidipoondi.
The Plain Particle Boards are engineered from wood. Specifically sized wood chips are used in making boards, bonded with synthetic resin pressed under heat and temperature. The boards produced are denser and more uniform in their constitution as compared with plywood or general wood. Sharon Particle Board carries IS: 3087 certification.
Sharon Particle Boards carry the same mark of quality and assurance as to the other products and these are the best in the category.
Test Properties | Specification as per IS:3087:2005 (Grade – II) | Thickness | ||
9 mm | 18 mm | 25 mm | ||
Density (Kg/m3) (Variation +/-10%) | 500 – 900 | 690 | 650 | 630 |
Moisture Content | 5% – 15% | 6.5% | 6.5% | 7% |
Modulus of Elasticity (MoE) (N/mm2) Avg. Min. Ind. |
2000 1800 |
2400 2000 |
2350 2000 |
2250 2000 |
Modulus of Rupture (MoR) (N/mm2) Avg. Min. Ind. |
11 10 |
13.44 13 |
13.11 12 |
12.72 12 |
Tensile Strength (N/mm2) Upto 20 mm thick Above 20 mm thick |
0.3 |
0.40 |
0.36 |
0.34 |
Maximum Linear Expansion Length Width |
0.50% 0.50% |
0.15% 0.15% |
0.17% 0.17% |
0.17% 0.17% |
Thickness Swelling, 2 hrs. | 12% | 8% | 8% | 8% |
Maximum Water Absorption After 2 hrs. After 24 hrs. |
40% 80% |
25% 50% |
25% 50% |
25% 50% |
Minimum Screw Withdrawal (N) Face Side Edge(for thick > 12 mm) |
1250 700 |
1400 NA |
1400 900 |
1350 900 |
STANDARD SIZES (ft) | 9’ × 6’ | 8’ × 6’ | 6’ × 4’ | 9’ × 3’ | 8’ × 3’ | 6’ × 3’ |
STANDARD THICKNESS (mm) | 9 | 11 | 12 | 15 | 17 | 18 | 25 |