Sovereign FILM FACE SHUTTERING PLY
Capable enough to withstand the vibrations and forces dense concrete produces as it is being poured. Sovereign Film Face Shuttering Ply, reinforced with high-quality veneer is just the support you need.
Our Highlights
Made from tenderized veneers with special phenolic resin for bonding.
Fully automatic Veneer Core Jointer provides single sheet of cross and panel core – resulting in greater strength and stability.
Bonded with unextended Phenol Formaldehyde Synthetic Resin (Conforming to IS: 848) and the surface is overlaid with 180 GSM Phenol Impregnated Film.
The sides are sealed to prevent water absorption and swelling.
| FF23 | FF30 | FF34 | |
| Weight (Kg) | 23 | 30 | 34 |
| No. of Layers | 9 | 12 | 13 |
| No .of Cores | 5 | 8 | 9 |
| GSM Thickness | 120 | 120 | 120 |
| Density (Kg/m3 Approx.) | 600-650 | 800-850 | 900-950 |
| Grade | BWP | BWP | BWP |
| Confirmed Repetitions* | 4-5 Times | 8-10 Times | 12-15 Times |
- Excellent construction material
- Three times more load distribution capacity
- Less span cost during shuttering
- Reduced labour cost because of maximum reuse
- Better screw holding capacity
- Resistance to high temperature
- Mechanical & Physical Strength to bear vibration
- Do not drop from height
- Clean surface after 3-4 uses with mould oil
- Keep on flat surface
- Use proper nailing
- Fill up holes with putty
- After use, dry the panel before stacking
- Use corners to avoid damages